Elimia Combination Motor Starter 208-230V 23-32 Amp 10 HP Nema 4X Pump HOA

Description

Please contact us for more help 1-855-4elimia.
This is for a new enclosed magnetic motor starter with disconnect and supplemental circuit breaker designed to start, stop and protect machines.  This unit is set up with HOA (Hand/Off/Auto) controls commonly used in pump applications.
Pre-wired for easy installation.
This starter includes a three position rotary switch, run indicator light and enable indicator light. With this set up two wires will be stubbed that can be connected to a normally open dry contact, upon closing the starter engages in "Auto" mode.
Included:
-Motor Starter 23-32 Amp with size 40 contactor
-
Rotary disconnect switch 60 Amp
-Hand/Off/Auto Selector Switch
-Run light
-Enable light
-Pre-wired, control power is 230V
-40A 3 pole circuit breaker, type UL1077
-Pre-wired, you only provide line and load - everything else is already there.
-Completely assembled in NEMA 4X Polycarbonate enclosure with hinged door.
The unit will arrive completely assembled in a real nice Nema 4X hinged door enclosure.  Mounting feet are now included and shipped loose with assembly.  Mounting feet allow for installation without effecting water proof integrity.
Our motor starters use UL certified IEC type components.
Our disconnects are UL approved and rated appropriately for each assembly.
IEC type motor starters are made up of primarily two parts. A contactor and overload device. Both devices have maximum ratings and the overload has maximum and minimum ratings. You should choose a motor starter that fits both criteria. If you need help please email or call, we will be glad to assist.
This assembly is sized specifically for 10 HP, 208-230V, 3 Phase applications.  Your motor FLA rating should fall between 23-32 Amps.
MAX Ratings of contactor used in this starter, do not exceed ratings. We generally use a contactor at least one size larger than the overload relay:
Size 40 AC3 Rated
1 phase- 7.5 HP @ 240 VAC Max FLA 40 Amps
3 phase- 15 HP @ 200 VAC Max FLA 48 Amps
3 phase- 20 HP @ 240 VAC Max FLA 54 Amps
3 phase- 30 HP @ 460 VAC Max FLA 34 Amps
3 phase- 30 HP @ 600 VAC Max FLA 27 Amps
Control voltage should be
208 - 240 VAC
and is pre-wired. (Note: the power source for the control wiring of this starter is pre-wired and sourced from your feeder wiring directly on the line side of the starter.  You will not need to pull in a separate power source for the controls).
The control voltage is the voltage used to activate the coil of the contactor. In the simplest install you will want a coil voltage the same as your power supply. But is some cases you might want the control voltage to be different for a host of reasons.
All components used in our assemblies are UL.
The overload will have an adjustable Amperage range. Your overload choice is based on your machines FLA. If your machine motor has a FLA of 10 Amps at your supply voltage then you should choose the overload where 10 Amp falls within the adjustable range. For a 10 Amp FLA we would recommend overload 9 - 13 Amps.
Our overloads can be set for manual or automatic reset operation. The overload control is pre-wired by Elimia in a way that trips the starter. This is done to protect your equipment and is one of the main purposes of a motor starter.
Components mounted on a easy to remove back plate.
This assembly comes with a premium enclosure with hinge door.
Enclosure is NEMA 4X (also rated Nema 1, 2, 3R, 4, 5, 12, 13, 6, 6p) made in USA by Enclosure Solutions. Provides protection from water/dust/oil. UL listed to 600V.  This enclosure does not provide knockouts for wiring.
Enclosure size is 12x10x6 inches
We can build any panel to your specs and at very reasonable price and turn-around.
90 day replacement Elimia warranty.
Great price!
We have pre-wired DOL motor starters available from 0 HP to 200 HP.
Elimia has assembled and supplied thousands of starters to customers all over the world. In addition to our standard products we design and built custom control panels and packaged drives. Our customers come back again and again for the value products we offer.
Please note: We stock an extensive inventory of contactors, overloads, enclosures, switches etc... We do not stock preassembled units due to the massive possible combination of products. All motor starters and assemblies are built to order. Lead time may vary from same day to three days. If you need something expedited please call us and we will let you know if we can accommodate.
Guarantee: Satisfaction Guaranteed! If you are not happy with your purchase within two weeks of arrival you can return it. No restocking fee! Offer excludes shipping and eBay fees. If the item has been installed and it turns out not be what you needed please call us. We will work with each customer and try to reach a resolution.
Please note: All items should be professionally inspected and tested prior to installation or use. We are not liable for damages, injuries or death relating to our products.
Payments: We accept Paypal and Credit Card payments. Credit card payments are only accepted over the phone.
We reserve the right to refuse payment from buyers registered in foreign countries or locations with non corresponding ship to addresses. Additionally, we reserve the right to refuse payment from any buyer which will feel is acting in a possible malicious manner.
Feedback: Once you are satisfied with your purchase please leave us feedback. If you have any problem with the transaction or product, please contact us.
CMS-23-32-240 HOA Nema 4X Size 40